Fixing your own plumbing can be a difficult and intimidating thing to try. There are so many things to know, and it seems like it could be easy to accidentally break something and make the problem worse. However, taking care of common plumbing problems can be easy with the proper knowledge. Read on for some practical tips on solving and avoiding plumbing issues.
Before starting any plumbing project be sure to turn off the main water supply. Water damage can be one of the most expensive things to repair. To minimize damage turn the main water supply off as well as any shut off valves near where you are working. This will save a great deal of hardship later on.
As the weather begins to get cold, attend to all of your exposed pipes by adding insulation to them. Pay particular attention to pipes located in crawl spaces and the outside walls of your residence. Taking this step will help ensure that your pipes continue to function throughout the winter.
Do not let your faucet leak. Did you know a leaky faucet can waste about 150 gallons of water every day? If you have a leak, never ignore it. It could be coming from the faucet or the pipes. Continually check pipes and faucets for extra moisture or small leaks.
Don’t pour cooking grease, leftover frying fat or any oils down your sink drain. They can clog your drains once they cool down. Even with a garbage disposal, you are going to cause it to be less efficient and risk drain backups. Dump your oil outside or in a container that you throw out with the regular trash.
Make sure everyone in your home knows where the main water shut off valve is and that they know how to work it. That way, if there is a water problem, anyone in your household can turn off the water, thereby reducing the chances that your home will incur major water damage.
If you want to keep your kitchen drains from clogging up, don’t pour grease down them. As it cools and congeals it can trap other food or waste particles, which over time can slow the draining of water and even form a clog that will not be easy to remove.
Set the temperature on your hot water heater to a temperature that does not exceed 120 degrees. This helps to save energy and prevents the water from becoming too hot and potentially scalding someone in your household. Older models that do not have a temperature setting should be set on Medium.
As you can see, solving plumbing problems isn’t so hard when you know what you’re doing, or if you have the right advice. When you are well-informed it can save you agreat deal of money. Make a note of what you’ve learned in this article and see how easy it is either to fix your own plumbing problems, or at the very least, ensure that you get a good service from a professional.