Tag: plumbing

Plumbing Tips You Can Try At Home

How many times have you called in a plumber, only to have him charge you an expensive rate for a simple fix that you could have done yourself? If you know a little more about your plumbing system, you can save a lot of money. Read this article dealing with some plumbing tips that you can use.

Do not use the liquid cleaning supplies that are designed to clear clogs. These cleaners are harmful and can damage your pipes as they clear the clog. Instead of using damaging liquids, use a plunger or a plumbing snake. These are much more effective and will not harm pipes.

Ensure that everyone in your household knows how to turn off the main water supply, or knows how to contact someone who can. In the event of a burst pipe or other water-related emergency, you should immediately turn off the water to prevent flooding, structural damage, and a sky-high water bill.

If your pipes are prone to freezing, let the water trickle continuously in at least one faucet during weather that is below freezing. This will minimize the chances that the pipes will freeze and leave you without water. If water is continually running through the pipes and trickling out of a faucet, the pipes are less likely to freeze.

When starting a plumbing project that is due to loud noises in your pipes empty the pipes first. This can be an easy fix to an other wise wasted huge job. Just close the main water line and open the facets throughout the house. After the water has stopped flowing turn the water on from the main source and check to see if the noise is eliminated.

To help you find a good plumber, you should get recommendations from people whom you trust. Asking a friend or a neighbor is usually more trustworthy than picking a random plumber out of the phone book. You need a competent plumber, otherwise you could be in for a much bigger problem down the road.

Never put fat, grease, or oils into your drain. They can clog your drains once they cool down. They’ll also muck up your garbage disposal and cause it to be less efficient. To keep your kitchen pipes clear, never dispose of grease down your sink drain.

Have you tried patching your pipe with the store-bought patching kits only to have that section of your plumbing continue leaking? Replacing the damaged pipe is a more permanent solution than patching. First, you must shut off the main water valve, and drain the water from the damaged section. Cut out the damaged section of the copper pipe, leaving about an inch of extra pipe on both sides of the damaged area. Remove corrosion from inside the pipes with a wire brush. Apply flux to the replacement pipe and the remaining pipe. Slide the piece of replacement pipe into place with couplings. Apply solder all around the joint, and use a propane torch to solder the replacement section into place.

There are times when a plumber’s service is necessary. However, many plumbing issues can be addressed easily if you know how. Learning more about how your plumbing works can save you time and money in repairs. Remember these tips, and they could save you a lot of headaches the next time you have a plumbing problem.…

Simple And Effective Plumbing Strategies Anyone Can Implement

Clogged drains are a problem for several people, as substances like food particles, hair, and other blockage can make a sink or toilet overflow. With a little prevention and purchasing a product like Dran-O, you can try plumbing by yourself. Read this article for some tips on how to do plumbing yourself.

Before starting any plumbing project be sure to turn off the main water supply. Water damage can be one of the most expensive things to repair. To minimize damage turn the main water supply off as well as any shut off valves near where you are working. This will save a great deal of hardship later on.

To help you repair a leaky water line, you should hire a plumber. A leaky water line can be a problem because it could lead to a flood. The best way to fix this problem is to hire a licensed plumber who is trained to repair the leak.

To prevent the pipes from freezing, it is advisable to seal off air vents, cracks and access doors. In order to keep the heat in and the cold out, you can try using insulation or caulk. In the event a leak occurs, make it a point to remind everyone where the master circuit breaker is so it can be shut off immediately.

It is important to know how to properly anchor your pipes when it comes to plumbing. This is extremely important to know because not having your pipes well anchored could result in loud noises, leaks, or pressure problems. Call a professional if you are unsure how to take care of it yourself.

Be careful about using liquid clog cleaners. These liquids can contain chemicals that are extremely bad for your pipes. Instead, use a snake or a plunger to dislodge any clogs you might encounter. Be sure to try these things before giving up and calling a plumber, who will probably re-perform those same acts.

At least once a year remove the faucet aerator and clean the screens. This helps it properly function. The function of a faucet aerator is to allow for an even flow of water and to conserve water. Be sure to clean out the aerator and you’ll notice a these things working.

Run lots of cold water whenever you use your garbage disposal. The blades will stay sharper, and the overall disposal process will run smoother. Don’t use hot water while running the garbage disposal. Hot water converts the grease in your trash to liquid form. When the liquified grease goes down the drain, it clogs the pipes.

Have your pipes in your plumbing system frozen? You can skip the cost of hiring a plumber by using this method. First, open the faucet so steam produced by the thawing process can escape. Begin thawing close to the faucet, and move down the line as each section thaws out. Use a hair dryer or a heat lamp to warm along the pipe. Even though this method consumes quite a bit of time, it is safer than most other heating methods. Furthermore, it requires no cleanup.

Hiring a plumber can be an expensive endeavor, and it may be unnecessary. Simple problems like clogged drains can be fixed at home without hiring a professional. Remember the tips in this article if you are having trouble with a sink or toilet overflowing or you need to clear a drain.…

Plumbing Made Simple – Tips To Help You On Your Plumbing Projects

Are you doing your own plumbing for the first time? You probably don’t even know where to start. It’s no secret that doing your own plumbing for the first time can be a bit overwhelming. Below are some tips that can help to make maintaining your own plumbing a bit smoother.

Make sure you know where your home’s water shutoff is located. You never know when there might be an emergency involving a broken pipe or damaged connection that requires you to turn off the water right away. In addition, knowing where the shutoff is located is vital before you start any plumbing project, in case anything goes wrong.

Do not put cooking oils, fat, or grease, down your drain. These fats cause clogs by solidifying in pipes. To properly dispose of fats, put them in a bowl with a lid that you can dispose of. Once it gets hard, throw it in the trash or compost bin.

Do not let your faucet leak. Did you know a leaky faucet can waste about 150 gallons of water every day? If you have a leak, never ignore it. It could be coming from the faucet or the pipes. Continually check pipes and faucets for extra moisture or small leaks.

Making sure you know all of your problems so you can have them fixed by one plumber visit is very beneficial. Having them all fixed in one visit takes a lot of money off of your bill because you don’t have to pay for the visit multiple times so make sure you make a list first.

During the winter, preventing frozen pipes when you live in a small dwelling can be something good to know. Frozen pipes will not only stop your flow of water but can crack and damage pipes. By running a little water out of every faucet during the coldest parts of the day, you can avoid this.

Avoid using hard cleaners on your toilets, such as drop-in cleaner tabs in the tank. When these tabs are almost completely dissolved, what’s left of the tab gets washed into the bowl. This can then end up clogging the toilet’s port holes, preventing the toilet from flushing properly. It can take months for this debris to finish dissolving in those holes.

Find out the plumbing codes in your local area before starting any project. Plumbing codes can vary wildly from area to area and you don’t want to run afoul of the codes. Visit your local building department to find out information or hire a plumber for a day to help you go over your plans and provide advice.

Make sure that your tool box is ready for any project you are preparing to do. The last thing you want is to be knee deep in a job only to find that you are missing the one tool you need to finish. Be sure to have various sizes of pipe wrenches that can be used to complete any job.

As you have seen, doing your plumbing is not as scary as it may appear at first. Just think of all of the benefits it has and all of the expenses it can take care of, along with all of the money it can save you in the long run.…

Plumbing Information That Can Save You Money!

Everyone has plumbing questions, every now and then. It is important to have the necessary knowledge to fix plumbing issues yourself instead of calling a professional. These tips and hints will give you a little enlightenment on both ends of the spectrum, thus giving you the choice to proceed as you need with your plumbing demands.

If you discover a frozen water pipe, turn on a nearby faucet so that thawed ice has a place to go. This helps decrease any pressure in order to prevent burst pipes. A burst pipe can create damage that is expensive to repair.

Pump your septic tank every five years to keep it working well. Having your septic pumped will keep sediments from settling to the bottom of the septic tank and causing the tank to malfunction or backup. It is a small price to pay now to keep your septic in good working order and prevent having to pay for a major repair caused by a backup.

Pass on seemingly convenient cleaning products like bleach tablets and blue toilet tabs. These products may well remove odors, but they have the side effect of damaging the rubber in your toilet, which can prevent your toilet from functioning correctly.

You can easily see if there are any serious damages caused by leaks by checking if the floor is soft around toilets. Straddle your toilet by rocking it from foot to foot to see if there’s any weakening or softness on the floor below you. You can save a lot if you catch these issue sooner.

Schedule one plumber to take care of all your issues in one single visit. By doing so, you can save up enough money to pay for the repairs. It also costs less because most plumbers will charge you per hour and include a minimum rate for coming out. If you call them out multiple times, those charges for them coming out will add up quickly.

Remember that your toilet is not intended to be used to dispose of trash. Don’t flush items like paper towels, sanitary napkins, diapers or cotton balls, because these items don’t break down and may cause clogging issues. Use the least amount of toilet paper you can when you use the toilet, too.

A sink with poor water pressure can often be corrected by cleaning the built-up sediment out of the aerator. Get rid of the aerator, remove it, and clean it with a brush dipped in some vinegar. Thoroughly rinse off the aerator, put it back together and place it back on the faucet. Clean the aerator, it might increase your water pressure.

If you have plumbing problems caused by grout in the water lines, it is best not to attempt to fix it yourself. You can try dislodging some of the blockage which will open up the line. This works much better if your home has pipes made of plastic. However, you may never be fully rid of the grout without the assistance of a professional.

You need to know how to address problems before you actually experience them. In addition, remember that preventative maintenance can go a long way in avoiding problems, to begin with. Use this advice for any future plumbing needs.…

Plumbing Tips That Can Help You Out

Professional plumbing is often a very expensive service, and usually the work that is done is something that any homeowner could solve fairly easily with the proper knowledge and tools. If you’d like to start learning to solve your own plumbing problems, read on to see what you can do.

Use strainers in all drains to catch hair and other objects. This will prevent all the material from going down the drain and causing a clog, which can cause a bigger problem down the line. Clean out the strainers daily so that you don’t start getting backup of water in your sink or tub.

Avoid using hard cleaners on your toilets, such as drop-in cleaner tabs in the tank. When these tabs are almost completely dissolved, what’s left of the tab gets washed into the bowl. This can then end up clogging the toilet’s port holes, preventing the toilet from flushing properly. It can take months for this debris to finish dissolving in those holes.

While it may seem like a seemingly harmless thing to do, never run potato peels through your garbage disposal. The chemical make up of this seemingly harmless food allows the potato to turn into a thick, viscous substance that can wreak havoc on the disposal itself, with the potential to render it completely useless.

If your plumbing is making strange noises you may have lost something called your “air cushion”. To turn this back on, you’re going to need to turn off your main water supply. Run all faucets in your house and then turn back on your main water supply. This should make everything sound better again.

If your toilet is constantly developing moisture on the outside, you may want to consider turning up the heat in your bathroom. The biggest cause of “sweaty” toilets is cool and moist air. Believe it or not, this moisture could actually cause damage to your toilet, so it is crucial that you fix the problem.

Avoid using harsh chemicals to clear clogged drains by purchasing a hand-held manual auger. A drain auger is a one-time purchase as opposed to purchasing a new bottle every time a drain is clogged. This is especially helpful for people who deal with clogged drains often, such as people with long hair or kids who like to drop things down the drain.

Do not ignore a slow flushing toilet. This is usually a sign that something is wrong. It can also cause backups and overflows. The most common causes of a slow flushing toilet are sediment build up, tank malfunctions, or partial clogs. You should periodically check for these problems.

Keep an eye on the hoses for your dishwasher and washing machine. These hoses can leak and bulge, which can be a problem. Check them for signs of wear and tear and replace any hoses more than 10 years old. You’ll find that these hoses age well, but you have got to make sure they are doing the job they should.

As you can see, plumbing isn’t as difficult as you may have believed. Many plumbing problems can be solved easily with things on hand, or with a few inexpensive parts. Next time you have a problem with your plumbing, try using the tips in this article to solve it yourself!…

Things That You Need To Know About Plumbing

Water may be needed to live, though it can be the cause of frustration for anyone that is dealing with a plumbing issue. One little mistake can lead to major water damage inside your home, which can end up costing you a small fortune to fix. Thankfully, it doesn’t take expert knowledge to repair a problem and keep your plumbing system well maintained so that future issues are prevented.

Plumbing that constantly squeaks, pounds, and emits other noises is irritating but, fortunately, the problem is often easily fixed. You must anchor any type of exposed pipe. If pipes are located in the floors, ceiling or walls, a professional might be needed for the job.

If you don’t want plumbing in your home frozen, then don’t let the inside temperature go under the freezing mark, and make sure any pipes that have no protection from the elements are thoroughly insulated. Pipes will freeze if they are exposed to temperatures below freezing. In the best situation, it can take hours for frozen pipes to thaw and water to run freely again. On the other hand, they can burst, which gets messy and really expensive.

You should have your septic tank pumped once every five years for best performance. Doing this prevents any sediment from getting built up within the tank, which causes a backup in your home or causes your entire septic system to fail. While it may cost a bit to have your septic tank pumped out, it will cost you much more to clean up any sewage backup or to repair or replace your septic tank.

Use strainers on all drains to keep foreign objects and debris from clogging drains. Whenever large particles become trapped in the strainer, remove them. The ones in your bathtub should also be cleaned frequently, as needed.

Keep grease, fat and oil out of your kitchen drain. Whenever they cool, they tend to harden and make clogs inside your drains. This can make your garbage disposal run slower. To keep your kitchen pipes clear, never dispose of grease down your sink drain.

Pour equal parts baking soda followed by vinegar down your bathtub drain once a month. Seal off the drain with a conventional plug or a piece of fabric while the natural chemical reaction takes place. After about 10 minutes you can flush the pipes out with boiling water. This procedure should be able to clear pipes of hair and soap scum.

By installing water-conserving shower heads in your bathrooms, you can save money on your monthly water bill. You use the majority of your hot water in the shower. Invest in an energy-efficient shower head and you could save a hundred dollar every year on your water bill.

In order to stay away from plumbing problems, you should make sure you are knowledgeable about the basics and prepared for the worst. You will make better decisions if you know what can damage your plumbing system. If a problem does arise, research and preparation ahead of time will make the problem easier to fix.…

Plumbing Tips That Can Save You A Bundle

Professional plumbing is often a very expensive service, and usually the work that is done is something that any homeowner could solve fairly easily with the proper knowledge and tools. If you’d like to start learning to solve your own plumbing problems, read on to see what you can do.

Avoid plumbing problems! Do not stop up the toilet! Some common items that will stop up a toilet include: toys, hair, paper towels, birth control items, and feminine personal products. Do not flush these items down your toilet – unless the instructions say otherwise! These can stop up your toilet – to the point that nothing else will work – except calling a plumber!

The next time you have a clogged drain, avoid the simple solution of dumping drain-clearing chemicals into the pipes. While this method involves the least amount of effort, the chemicals in these liquid cleaners are destructive to your piping. Instead, consider using a little bit of elbow grease with a plunger, snake, or other device designed to clear your clog without chemicals.

When concerned with plumbing, you need to know what can cause noisy pipes. This is important because it can mean the difference between an annoying noise and flooding in your house. Do your research to distinguish between the different noises and hire a professional if any serious risk is posed.

To avoid wasting water and having a potentially high water bill, check your home for leaky faucets periodically. Fix any leaks that you find right away. You may be able to do the repair yourself, but if not, you may have to seek the services of a plumber to make the repairs.

Got a leaky pipe? In many cases you can repair this yourself without the expense of a plumber. If a joint is leaking, tighten it with a pipe wrench. If the leak is coming from a damaged section of pipe, you can try repairing with a store-bought patching kit. One method involves applying waterproof tape to the section of pipe where there is leakage. Before applying the tape, make sure the pipe is thoroughly dry. Make sure that the tape covers two to three inches on either side of the breakage in the pipe.

Make sure that your tool box is ready for any project you are preparing to do. The last thing you want is to be knee deep in a job only to find that you are missing the one tool you need to finish. Be sure to have various sizes of pipe wrenches that can be used to complete any job.

Have your pipes in your plumbing system frozen? You can skip the cost of hiring a plumber by using this method. First, open the faucet so steam produced by the thawing process can escape. Begin thawing close to the faucet, and move down the line as each section thaws out. Use a hair dryer or a heat lamp to warm along the pipe. Even though this method consumes quite a bit of time, it is safer than most other heating methods. Furthermore, it requires no cleanup.

As you can see, plumbing isn’t as difficult as you may have believed. Many plumbing problems can be solved easily with things on hand, or with a few inexpensive parts. Next time you have a problem with your plumbing, try using the tips in this article to solve it yourself!…